Unsolved
This post is more than 5 years old
5 Posts
0
1149
R410 - Update onboard SATA controller firmware? New WD 10TB SATA HD reported by controller as 18TB
I have a circa 2010 R410 that has no Perc, just onboard SATA. I want to replace the onboard 500GB SATA drive with a new WD 10TB drive. When I boot the server with the 10TB drive installed, the onboard SATA controller reports 18TB. I haven't gone any further with OS install because the incorrect size report makes me a bit nervous.
I've updated the server BIOS but I can't find any packages to update the onboard SATA controller.
Any ideas? Many thanks...
kedarroy
5 Posts
0
January 10th, 2017 11:00
Service tag DXXXXX1
Express Service Code 28XXXXXXXX9
I found some Perc 700 kits with cabling at a local uses systems supplier. Provided the card and cabling work properly, would that see the 10TB properly?
kedarroy
5 Posts
0
January 10th, 2017 11:00
I have tried setting SATA, AHCI even RAID, makes sense it's probably 1.8T not 18T
Would a PERC700 work if I update it's firmware?