Unsolved
This post is more than 5 years old
1 Message
0
491
R220 Sys Fan3 0 RPM part?
Hi,
I think I am looking for a way to order a replacement part, a Sys Fan3, for an R220.
It's not turning.
The front panel indicators are blinking amber for Health indicator and Temperature indicator.
The would be consistent with a fan failure.
I have updated the IDRAC and bios and all drivers and windows updates, but I still get no success on the fan.
I am including a picture of the error from Hardware diagnostics, Service tag removed.
(Windows reports a critical power error and delayed start services are not loading.)
Thanks,
Brent.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 8th, 2017 10:00
Hello.
Fan 3 is optional but required only if you have PCIe card installed. This is what you can do before replacing the system fan. Firmly reseat the fan power cable from the power cable connector on the system board and try again. You can also swap the fans to ascertain whether or not the fans or fan power cable needs to be replaced. Otherwise, use P/N HFK46 for fan 3.
Thank you.