Change 6024 to 7024 routing question

I have a failing 6024 switch that I will replace with a 7024 switch and have a few questions.

The 6024 have a route type "Local" under routing config.

7024 don't have this route type, so how do I configure it to do "Local" routing.

I have configured IP to the vlans.

How do I get the 7024 to do the same thing?

Here is the current 6024 routing table.

============================== ROUTES in Dell 6024 ==============================

                Destination         Prefix Length     Next Hop             Route Type         Metric                   Protocol

                IP Address                                          (Gateway)

1              0.0.0.0                   /0                            172.16.10.35       Remote                1                       netmgmt

2              172.16.0.0            /16                         172.16.10.35       Remote                1                        netmgmt

3              172.16.10.0         /24                         Direct Connect  Local                      1                        local

4              172.16.12.0         /24                         Direct Connect  Local                      1                        local

5              172.16.14.0         /24                         172.16.10.22       Remote                1                        netmgmt

6              172.16.15.0         /24                         172.16.19.25       Remote                1            netmgmt            

7              172.16.19.0         /24                         Direct Connect  Local                      1                              local

8              172.16.128.0       /24                         172.16.10.35       Remote                1                        netmgmt