3 Posts
0
270
S5248F can not Config vlt-port-channel xx % Error: Internal error
We need to config interface port-channel114 to S5248F = 2 Units with VLT
for example
interface port-channel114
switchport mode trunk
vlt-port-channel 114
But put the command then show error
Dell-SW01(conf-if-po-114)# vlt-port-channel 104
% Error: Internal error
Please help me get the solution.
Thank you.
DELL-Chris H
Moderator
Moderator
•
8.9K Posts
0
July 6th, 2023 13:00
Kiattipong_Ballba,
Would you confirm a couple things for me?
Do you see the same thing after restarting the switch?
Have you checked to see if there is already a set for VLT, and if so have you tried removing any of the old ones?
Lastly, is the switch currently up to date on firmware?
Let me know and we can go from there.
Kiattipong_Ballba
3 Posts
0
July 9th, 2023 23:00
We try to Reboot Both Switch and put config again it work!!!