Unsolved
1 Rookie
•
1 Message
0
74
OS10 Enterprise SNMP monitoring of Optic RX/TX power?
I have looked on the internet and docs for quite awhile today, and I so far cannot find if there is a way to read the fields that you would get out of 'show interface phy-eth 1/1/1' etc
looking to use snmp to read things such as
SFP Tx power = 2.057996 dBm
SFP Rx power = 0.598284 dBm
Is this possible?
My test switch is a S5224F running 10.5.6.2.
Thanks!
DELL-Erman O
Moderator
Moderator
•
2.5K Posts
0
May 17th, 2024 06:34
Hello,
Frankly, I am not aware of such a reading. I couldn't see it as a result of my research. I did looked up here for MIBs https://dell.to/4bEO6E3
If you have OID may that help since it is similar to Cisco in many aspects, I looked for a way on the Cisco side. SNMP OID for TX/RX Power of SFP transceivers - Cisco Community