1 Rookie
•
23 Posts
0
844
I want to know the meaning of the temperature related log of S3048-ON
Hello
I checked the log below on the switch.
%STKUNIT1-M:CP %CHMGR-4-TEMP_STATUS_CHANGE: Unit 1 temperature state changed to 1 (Current temperature 40C).
%STKUNIT1-M:CP %CHMGR-4-TEMP_STATUS_CHANGE: Unit 1 temperature state changed to 2 (Current temperature 45C).
I know the switch temperature is 40C, 45C, but I don't understand the part painted in red
It says unit1 changed to 1 and unit1 changed to 2, what do 1 and 2 mean?
If I check the guide, I only see a command to check the equipment temperature along with a "show environments all" command.
The S3048-ON switch must operate between 0° and 45°C. Is it log related?
DELL-Joey C
Moderator
Moderator
•
3.4K Posts
0
March 21st, 2022 23:00
Hi @dell_sss,
Unfortunately, the log for temperature sensor status is not documented. I had done a few research on the ones you highlighted in red. Here's my opinion, the Unit X temperature state changed to Y; where Y is not related to Unit X.
Y, only denotes the sensor temperature range. For example, Y=1 is ranging of 40C to 44C, 2 is ranging 45C to 50C.
Attached the operating temperature of S3048-ON: https://dell.to/3wvt8WL