Access vlan 1 in port channel

Question

Hi,

I am configuring S4148FE-ON and while configuring port-channel i got following command

interface port-channel109
switchport mode trunk
switchport access vlan 1

switchport trunk allowed vlan 100,101

why

switchport access vlan 1

is coming there, I try to remove by no switchport access vlan 1 but it does not work. Do I need to remove or it is just working as native vlan as a default. I hope you will get my question

DELL-Josh Cr · Answer

Hi, Is it automatically adding the command? It shouldn’t affect anything being there since it is in trunk mode.

bkumar100 · Answer

Hi Josh, Thank you so much for response, Yes it comes automatically but it is working fine. I have another issue in S4148FE-ON is I want to implement UFD in VLT, however, it does not support the command: 'uplink-state-group 1'. I also face issue to create banner and does not have banner commad, is there anyway to create UFD and banner in S4148. Appreciate your help.

DELL-Josh Cr · Answer

What OS version are you using?

bkumar100 · Answer

Hi Josh, Here is our Switch version. I have manual showing many commands that does not work in this Switch, is any idea?

OS Version: 10.3.1E Build Version: 10.3.1E(152) Build Time: 2017-11-03T10:44:40-0700 System Type: S4148FE-ON Architecture: x86_64

DELL-Josh Cr · Answer

I would recommend using the latest firmware and make sure you are using the manual for the same version, OS 10 has different features than 9. https://topics-cdn.dell.com/pdf/force10-s4048-on_reference-guide7_en-us.pdf

ship102 · Answer

Hi,

I had the same problem in S4148F-ON/S4148T-ON (SW Version: 10.4.0E(R3)).

However, using the firmware 10.4.3E, I can remove the setting by "no switchport access vlan".

If any of the versions fix this issue, could you tell me which version it is?

Networking General

Access vlan 1 in port channel

Was this post helpful?