Unsolved
This post is more than 5 years old
117 Posts
0
1149
Error While JBConfig in Networker 7.4.
Hello All,
We are using Networker 7.4 with TX24 S2 jukebox in Windows 2008 32 bit environmnet.
While doing jbconfig i got following error.
39074:jbconfig: Jukebox notice: Cannot load ntmsapi.dll
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ..
15815:jbconfig: Will try to use SCSI information returned by jukebox to configur
e drives.
Complete output
------------------------------------------------------------------------------------------------------------------------
D:\Networker\nsr\bin>jbconfig
Jbconfig is running on host s4bckserver.bar.nsn.com (Windows Server 2008 6.0),
and is using s4bckserver.bar.nsn.com as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
39074:jbconfig: Jukebox notice: Cannot load ntmsapi.dll
14484:jbconfig: Scanning SCSI buses; this may take a while ...
Installing 'Standard SCSI Jukebox' jukebox - scsidev@3.0.1.
What name do you want to assign to this jukebox device? jb
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ..
.
15815:jbconfig: Will try to use SCSI information returned by jukebox to configur
e drives.
Turn NetWorker auto-cleaning on (yes / no) [yes]? no
The following drive(s) can be auto-configured in this jukebox:
1> LTO Ultrium-3 @ 3.0.0 ==> \\.\Tape0
These are all the drives that this jukebox has reported.
To change the drive model(s) or configure them as shared or NDMP drives,
you need to bypass auto-configure. Bypass auto-configure? (yes / no) [no] no
Jukebox has been added successfully
The following configuration options have been set:
You can review and change the characteristics of the autochanger and its
associated devices using the NetWorker Management Console.
Would you like to configure another jukebox? (yes/no) [no]no
D:\Networker\nsr\bin>
------------------------------------------------------------------------------------------------------------------------
Any Idea about it. How to resolve it.
Thanks
With Regards
Hemant
We are using Networker 7.4 with TX24 S2 jukebox in Windows 2008 32 bit environmnet.
While doing jbconfig i got following error.
39074:jbconfig: Jukebox notice: Cannot load ntmsapi.dll
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ..
15815:jbconfig: Will try to use SCSI information returned by jukebox to configur
e drives.
Complete output
------------------------------------------------------------------------------------------------------------------------
D:\Networker\nsr\bin>jbconfig
Jbconfig is running on host s4bckserver.bar.nsn.com (Windows Server 2008 6.0),
and is using s4bckserver.bar.nsn.com as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
39074:jbconfig: Jukebox notice: Cannot load ntmsapi.dll
14484:jbconfig: Scanning SCSI buses; this may take a while ...
Installing 'Standard SCSI Jukebox' jukebox - scsidev@3.0.1.
What name do you want to assign to this jukebox device? jb
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ..
.
15815:jbconfig: Will try to use SCSI information returned by jukebox to configur
e drives.
Turn NetWorker auto-cleaning on (yes / no) [yes]? no
The following drive(s) can be auto-configured in this jukebox:
1> LTO Ultrium-3 @ 3.0.0 ==> \\.\Tape0
These are all the drives that this jukebox has reported.
To change the drive model(s) or configure them as shared or NDMP drives,
you need to bypass auto-configure. Bypass auto-configure? (yes / no) [no] no
Jukebox has been added successfully
The following configuration options have been set:
Jukebox description to the control port and model.
Autochanger control port to the port at which we found it.
Autocleaning off.
Barcode reading to on.
Volume labels that match the barcodes.
Autochanger control port to the port at which we found it.
Autocleaning off.
Barcode reading to on.
Volume labels that match the barcodes.
You can review and change the characteristics of the autochanger and its
associated devices using the NetWorker Management Console.
Would you like to configure another jukebox? (yes/no) [no]no
D:\Networker\nsr\bin>
------------------------------------------------------------------------------------------------------------------------
Any Idea about it. How to resolve it.
Thanks
With Regards
Hemant
DavidHampson
1.1K Posts
0
July 14th, 2009 08:00
Hemant-I97jT
117 Posts
0
July 15th, 2009 03:00
Thanks for your response.
Yes. I checked all drives are up-to-date.
Any other pointer ?
Thanks
With Regards
Hemant
ble1
2 Intern
2 Intern
•
14.3K Posts
0
July 21st, 2009 13:00