Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

malletam

2 Posts

5048

August 16th, 2007 12:00

installing fedora 6 and boot from USB

I have a problem when booting from USB port a linux fedora 6 . I got the message " error loading OS". I got an Inspiron 9400 bought in last march with windows vista My idea is to install Linux under a new disk and boot linux from USB. Here are what I did: I download an iso image (FC-6-x86_64-DVD.iso) under windows vista . I burned a DVD with the iso image . I have booted from the DVD and got the installation procedure ( anaconda) . The installation worked fine , the disk got formatted and the software installed . As a test I have booted from the hard disk and got windows : fine. I changed the boot sequence and put USB in first in the boot list and I rebooted the PC . and at this point I got the message "error loading OS" . Does someone had already got this problem? Is it possible to boot from USB ? any OS? Thanks for your ideas . malletam from France

blackmetal

4 Posts

August 16th, 2007 16:00

I'm not an expert at this, but I suspect the boot loader doesn't know where the O/S is. You may need to use a recovery cd (for Fedora Core 6) and use the grub command to enter the console. Some command like 'rootnoverify' needs to be used. You can google it to find out.
 
I'm curious if when your computer boots, does it go straight into Windows, or is there a windows boot loader, or grub boot loader first? I suspect that you don't have grub working. There shouldn't be a problem with booting from USB as I have a Knoppix version on my stick and it works fine.
 
Good luck. And post your solution as I'm sure others will run into a similar problem.

malletam

2 Posts

August 17th, 2007 19:00

Thanks for your reply . For your understanding of my problem I have 2 disks : 1 with windows and another one where I want to install Linux . The installating procedure from fedora did not ask me for any boot loader ( grub or lilo ) I don't know which loader is used and if fedora is using the masterboot record of my disk . I have not yet a solution ! I have already used knoppix from a CD and it works fine . Have a nice day and thanks again.

Was this post helpful?

View All

0 events found

No Events found!

Top