Unsolved
This post is more than 5 years old
1 Message
0
394
Tuning an HBA Fibre Channel Tachyon TL/TS/XL2 A6795A model on HP-UX 11.11
Is it possible to customize an HBA A6795A on HP-UX 11.11 to encrease performance ?
Thanks for your help.
Thanks for your help.
paulo3
2 Intern
2 Intern
•
202 Posts
0
June 22nd, 2007 14:00
You might check the HP forums:
itrc.hp.com
Second:
For the emulex cards the former Clariion procedure generator contains the EMC recommended HBA settings. I generated one for HPUX but, the newest doesnt contains any settings.
Third:
Another useful docs is the fcsmutil man page. You can query the HBA parameters.
http://docs.hp.com/en/B2355-60127/fcmsutil.1M.html
It doesnt contains too much settings, except the topology.
I know better the emulex cards.
For the emulex cards the the target queue depth influences the speed, but
in many cases it not so significant.
I think the correct Powerpath and Os settings better influences the performance.
(For example Powerpath policy, autotresspass settings)
Paul