Unsolved
This post is more than 5 years old
2 Posts
0
2437
SMI-S provider for CLARiiON
I need to develop SMI-S based access to CLARiiON.
Where can I get the documentation about SMI-S implementation
of the device model and management services?
All the .mof files available in the SMI-S provider distribution are
SMI-S generic and do not contain specific EMC/CLARiiON infromation.
Thanks, Kathy.
Where can I get the documentation about SMI-S implementation
of the device model and management services?
All the .mof files available in the SMI-S provider distribution are
SMI-S generic and do not contain specific EMC/CLARiiON infromation.
Thanks, Kathy.
JasonBailey
147 Posts
0
November 5th, 2006 17:00
I don't think the SMI-S release notes cover your specific question, but if you haven't read them yet, they may help
Documentation/White Paper Library > Software S > SMI-S Provider > Release Notes
SMI-S Provider Release Notes 3.1 A02
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-003-313_a02_elccnt_0.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tDb250ZW50RXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwMWMzZDRmLG5hdmVOb2RlPVNvZndhcmVEb3dubG9hZHM
Kathy-od58v
2 Posts
0
November 6th, 2006 00:00
Thank you for your reply. I did read the release notes document.
It does not cover the information I need.
Moreover it sends to E-lab Issue Tracker for more specific information about
open/fixed issues in a provider and the Issue Tracker information search does not have entries like described in Release notes. May be it is going to be updated soon...
What I'm looking for is object schemas/charts describing how SMIS profiles are implemented for Clariion. Known issues database would be of a great help as well.
Kathy.
JasonBailey
147 Posts
0
November 7th, 2006 03:00
Try sending an email to dev_help@emc.com and see if they can answer your question.
Thanks
From: dev_help
Sent: Tue 11/7/2006 5:51 AM
To: Bailey, Jason
Cc: dev_help
Subject: RE: SMI-S provider for CLARiiON
Yes,
this is the proper forum. Can you refer the user to this address please?
thanks,
dev_help
-----Original Message-----
From: Bailey, Jason
Sent: Tuesday, November 07, 2006 1:51 AM
To: dev_help
Subject: SMI-S provider for CLARiiON
Hi Dev_Help
We have a customer on our forums asking about SMI-S for Clariion. Are you the right place to answer these questions?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
October 19th, 2007 06:00
1. Mask VCM and 4 GateKeepers from Symmetrix SMI-S Solutions Enabler host.
2. If Managing a CLARiiON and security is enabled:
a. Open Navisphere
b. Expand Tree to view the SP's
c. Right Click on each SP and add the SMI-S Solutions Enabler host to the Agents Tab with the entry of: system@SEHostnameOrIP
On Wintel SMI-S Solutions Enabler Host:
1. Install the SMI-S Version of Solutions Enabler from Powerlink
2. Navigate to the C:\Program Files\EMC\SYMCLI\storbin or add it to the path statement
3. Run TestSmiProvider.exe
4. To Validate connected Symmetrixes:
a. type "ein"
b. type "emc_storagesystem"
5. To Add CLARiiONs:
a. type "addsys"
b. type "y" (yes)
c. type "1" (Default for CLARiiON)
d. type "xxx.xxx.xxx.xxx" (SPA IP Address)
e. type "xxx.xxx.xxx.xxx" (SPB IP Address)
f. hit enter to proceed
g. enter the username (a local windows SAMDb user works)
h. enter the password (for local SAM user above - shows in clear text)
i. hit "2" (IP)
j. hit "2" (IP)
k. hit enter to exit after validation
6. To Validate Symmetrix and CLARiiON connectivity:
a. type "ein"
b. type "emc_storagesystem"
You should now see both the SYMs and the CLARiiONs listed in the cmd window.
Now from a SMICLI you should be able to connect with:
Provider Name: SESMI_HostNameOrIP
Port: 5988 (Default)
Namespace: root/emc
Username: LocalOrDomainAccountWithAccessToSESMI_Host
Password: for above account
- Steve
MarkF4
39 Posts
0
June 24th, 2008 22:00
Mark Foreman
Open Systems Forum Admin
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 1st, 2013 23:00
For the VNX, the steps are almost the same. But the path is C:\Program Files\EMC\ECIM\ECOM\bin