This post is more than 5 years old
16 Posts
0
1448
Assign disk to host from differents symmetrix boxes
i'm assign disk from 8830 and dmx1000 to hp-ux 11.11 host, but i can only see disk from 8830.
From dmx1000 only can see gatekeepers.
From dmx1000 only can see gatekeepers.
xe2sdc
2.8K Posts
0
February 3rd, 2009 14:00
You have to either
1) change FA configuration to enable V (volumeset addressing) or
2) use symmask set hba_flags to enable V for your HBAs
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
February 3rd, 2009 13:00
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
February 3rd, 2009 14:00
substitute for your FA/port and SID
jmvt
16 Posts
0
February 3rd, 2009 14:00
julieg1
305 Posts
0
February 3rd, 2009 14:00
I've moved this thread from the Powerlink Lite forum into the Solutions Enabler forum since you are registered as a customer and have access to all the forums.
Julie Gibson
Forums Admin
jmvt
16 Posts
0
February 3rd, 2009 14:00
jmvt
16 Posts
0
February 3rd, 2009 14:00
xe2sdc
2.8K Posts
0
February 3rd, 2009 14:00
symcfg -sid 1234 -FA 03A -P 1 -v list
You can easily find the flags Dynamox mentioned ...
xe2sdc
2.8K Posts
0
February 3rd, 2009 14:00
xe2sdc
2.8K Posts
0
February 3rd, 2009 14:00
jmvt
16 Posts
0
February 3rd, 2009 15:00
Cannot change certain poprt flags when port has devices mapped to it.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
February 3rd, 2009 15:00
jmvt
16 Posts
0
February 3rd, 2009 16:00
Stefano was right for HBA flags this works for me
2) use symmask set hba_flags to enable V for your HBAs ---> " the problem was i set Volume_Set_Addressing like hba_flag then just change this for "V" for each HBA wwn. "
It is great to have the support of the best Engineers in this forum.
I can see the disks now.
xe2sdc
2.8K Posts
0
February 3rd, 2009 22:00
xe2sdc
2.8K Posts
0
February 3rd, 2009 22:00
Oh BTW neither me nor (obviously) Dynamox are engineers
We simply have a lot of fun