Unsolved
1 Rookie
•
8 Posts
0
37
PS6010 firmware upgrade issue
Hi. I have a PS6010 (only one member in the group) for which I am trying to upgrade the firmware. Originally it had version 5.2.4, and I upgraded to 5.2.11. Everything came up OK. Then I tried to go from 5.2.11 to 6.0.11. That didn't go that well. First controller (Slot 0) got upgraded to 6.0.11 but now the array shows "Control module is not installed" in the Slot 1.
Does anyone know how to recover from this ?
Many thanks in advance.
xoy
1 Rookie
1 Rookie
•
8 Posts
0
November 11th, 2023 06:15
Actually after pulling out the controller and inserting it back in, it came back to life.
dwilliam62
3 Apprentice
3 Apprentice
•
1.5K Posts
0
November 14th, 2023 12:13
@xoy
Glad that worked for you. Did you check that the 2nd CM also upgraded OK? If not, at the CLI of the active (If using serial port) or SSH, run update. Make sure there is not a firmware kit uploaded. Without a kit, the update program will make the passive CM firmware match the primary.
Regards,
Don
#iworkfordell