Unsolved
This post is more than 5 years old
2 Posts
0
79815
January 4th, 2016 04:00
Dell Command | Configure - Wrong values on GUI-interface
Hello,
We have several Dell Precision T1700 clients and I wanted to create a BIOS template via Dell Command | Configure. In opposite to our other clients (Latitudes, Optiplex...) the GUI shows completely wrong BIOS settings in the column which shows the configured/true values (from BIOS).
This is what I did:
1) Updated BIOS to A16
2) Reset to defaults
3) Configuration of BIOS settings (and of course I saved the settings)
4) Installed Windows 7 Ultimate x64 (manually)
5) Installed all drivers (manually)
6) Installed Dell Command | Configure 3.1.0.250 (on the same T1700 client)
7) Started the GUI of Dell Command | Configure
8) Changed to second tab "create local system package" (or something like that... I use the German GUI). This tab should show the configured values which I set before in BIOS (step 3).
9) However the values are wrong! I checked several settings I changed in BIOS before: One example: in BIOS I enabled Wake on LAN feature (without PXE) and disabled Deep sleep control. However according to Dell Command Configure WOL is disabled and Deep sleep control is still active. I attached a screenshot (German GUI).
Moreover I enabled SMART warnings. However Dell Command Configure shows it as "disabled" ( which is the default value).
10) Older versions of Command Configure have the same issue. Or it is a BIOS issue...
11) Resetting to default values in BIOS and re-configuring BIOS didn't help.
Can someone help?
Tarun Kr Agrawa
21 Posts
0
January 4th, 2016 21:00
Hi,
Can u please share the .ini dump of your BIOS settings for more investigation.
Open DCC Command Prompt as an administrator and use following command -
cctk -o .ini
Please share screen shots of Wake on LAN setting and Smart Warnings in F2 also. It will be helpful