Unsolved
This post is more than 5 years old
3 Posts
0
56965
how to solve OPTIPLEX 790 Start problem - "entering safe mode" message
how to solve OPTIPLEX 790 Start problem - "entering safe mode" message
Unsolved
This post is more than 5 years old
3 Posts
0
56965
how to solve OPTIPLEX 790 Start problem - "entering safe mode" message
Top
Mary G
4 Operator
4 Operator
•
20.1K Posts
0
January 17th, 2012 07:00
Open msconfig and make sure Safe Mode is not selected on the boot tab.
kattukk
7 Posts
0
February 15th, 2012 00:00
i have the same problem with the monitor on the DisplyPort
when i start the optiplex 790 and turn the monitor later it wont come on (power save mode- no power on the connector ditected)
when i start the computer with monitor turnd on there is no problem
when the computer is loged on and i exedently triggert the powerbutton of the monitor i get 2 different problems (random), somtimes the monitor wont come back (power save mode- no power on the connector ditected) or it will come back with a different resolution (1280*1024 when is whas 1680*1050)
i have tried a newer vga driver directly form intel and the problems for exedential triggering the powerbutton is gone
the powerup broblem is still there.
Optiplex 790 sff
p2210 monitor on Displayport
Windows XP sp3
speedstep
9 Legend
9 Legend
•
47K Posts
0
February 15th, 2012 08:00
Install the monitor driver and make sure windows can see it as something other than Generic monitor.
http://ftp.us.dell.com/monitors/DELL_P2210-MONITOR_A00-00_R217928.EXE
noelms
3 Posts
0
February 16th, 2012 04:00
Tried all no joy ---Thank you all for help, but PC motherboard was one of the issues had to be changed--problem solved