Unsolved
This post is more than 5 years old
2 Posts
0
5204
COM Port unavalaible
Good morning from Spain:
I have a DELL Latitude CPi A-400. After I did the BIOS upgrade (from BIOS-A09 to BIOS-15) the COM port is unavalaible. I remove it from all configurations and installed again, but doesn't work. I use the W98 second edition and the configuration of the COM port is correct. The driver for the COM port is
from 5-11-1998. When I run a aplicattion that use the COM port, the application doesn't work properly and locked it. Please, some solution for this problem.
Thank you very much.
I have a DELL Latitude CPi A-400. After I did the BIOS upgrade (from BIOS-A09 to BIOS-15) the COM port is unavalaible. I remove it from all configurations and installed again, but doesn't work. I use the W98 second edition and the configuration of the COM port is correct. The driver for the COM port is
from 5-11-1998. When I run a aplicattion that use the COM port, the application doesn't work properly and locked it. Please, some solution for this problem.
Thank you very much.
DELL-Mel
259 Posts
0
July 16th, 2002 21:00
Thanks for using Delltalk. I apologize for your issues.
Since this is a discussion forum for general hardware issues with Dimension desktop systems you may find more help in the latitude forums.
You may wish to post this in the Latitude General Hardware forum, Click Here
Respectfully,
Mel
Delltalk Moderator
jlarevalo41
2 Posts
0
July 18th, 2002 05:00
I find the solution in the Latitude General Hardware forum. It's based on to set "DISABLED" the infrarred port in BIOS setup.