Try moving the us robotics off of com1 to another com port /irq-com1 should be irq 4 and com2 should be irq 3 and allow the new equipment to use com1. I have found win modems and other devices to battle over com ports and not be a Dell issue. If the modem is a win modem then try a different type modem to free up the com port.
Kenny Williams
1 Rookie
1 Rookie
•
67 Posts
0
April 12th, 2000 20:00
Knowledge Base should have IRQ & I/O assignments for your specific system.
sjbirk02
56 Posts
0
April 16th, 2000 05:00