I have a Dell stand (photo below) I want to use with a non-Dell monitor that has 100 x 100 mm Vesa hole mount pattern and Can someone tell me what kind of adapter to buy to make the stand work?
You cant use Your Stand with the Dell Plate. The stands that work with the vesa plate go up and down and also rotate portrait and landscape with a swivel in the center held by 4 screws.
452-10833
Vesa Plate Upgrade Required to mount a non-Dell Monitor to the flat panel stand (Kit)
So the G999H , Y009C is compatible with the following but not limited to: Dell E-Series Flat Panel Monitor Stand DELL 330-0874, R427C, RM361, T545C, M520M E-FPM Monitor Stand and Laptop Notebook Dock For Dell Latitude E4200, E4300, E5400, E5500, E6400 / 6400ATG, E6500 E-Family Laptops and Precision M2400, M4400, M6400 Mobile
So you remove the Dell Plate with fingers by removing the 4 screws in the center and put this plate on. Then you put the standard screws for vesa mounting thru the plate via the rear.
Dan-H
1.2K Posts
0
September 27th, 2017 23:00
maybe this?
accessories.dell.com/.../productdetail.aspx
keep in mind the weight for the new monitor may be a bit less than the original and won't have enough weight to adjust down and stay down.
speedstep
9 Legend
9 Legend
•
47K Posts
1
September 28th, 2017 05:00
You cant use Your Stand with the Dell Plate. The stands that work with the vesa plate go up and down and also rotate portrait and landscape with a swivel in the center held by 4 screws.
452-10833
Vesa Plate Upgrade Required to mount a non-Dell Monitor to the flat panel stand (Kit)
VESA adapter plate For E-Flat Panel Monitor Stand
https://www.ebay.com/i/401352352466
DP/N: Y009C KIT,PLT,MTG,VESA,E-FPM,75/100M
DP/N: G999H. CUS, PLT, MTG, VESA, E-FPM
So the G999H , Y009C is compatible with the following but not limited to:
Dell E-Series Flat Panel Monitor Stand DELL 330-0874, R427C, RM361, T545C, M520M E-FPM Monitor Stand and Laptop Notebook Dock For Dell Latitude E4200, E4300, E5400, E5500, E6400 / 6400ATG, E6500 E-Family Laptops and Precision M2400, M4400, M6400 Mobile
https://www.amazon.com/Dell-Monitor-Optional-Mounting-Latitude/dp/B007TKXYYS/
So you remove the Dell Plate with fingers by removing the 4 screws in the center and put this plate on. Then you put the standard screws for vesa mounting thru the plate via the rear.
That needs a stand with mounting like this.