Pool 0 - Unable to destroy the Storage Pool. Remove any LUNs in the pool and verify that the pool is accessible, then retry the operation. (0x712d850f)
Cannot delete Storage Pool.
Resolution
Follow these steps to delete the Storage Pool:
Make sure the pool status is Active.
Delete all the user and private LUNs that are bound to that pool.
Delete the pool.
Additional Information
In one case, the user tried to delete the Pool 0 and received above error message from Unisphere. Pool 0 was selected and it was determined that user LUNS were bound to it. The private LUNS were checked and it was determined that five private LUNS were presented to the Reserved LUN Pool (RLP). All the private LUNs from the RLP were removed and it was deleted. Then Pool 0 was deleted successfully.
DELL-Sam L
Moderator
Moderator
•
7K Posts
0
June 14th, 2023 06:00
Hello dalle2,
Here is a link to a kb that will be of assistance in removing your pool.
https://dell.to/3N9yj5k
dalle2
4 Posts
0
June 15th, 2023 00:00
thanks , but when i open the URL told me This article is permission based. Find another article.
DELL-Sam L
Moderator
Moderator
•
7K Posts
0
June 15th, 2023 06:00
Unable to destroy the Storage Pool
Article Content
Symptoms
Pool 0 - Unable to destroy the Storage Pool. Remove any LUNs in the pool and verify that the pool is accessible, then retry the operation. (0x712d850f)
Cannot delete Storage Pool.
Resolution
Additional Information
dalle2
4 Posts
0
June 16th, 2023 22:00
How to delete the private lun from Unisphere ?
DELL-Sam L
Moderator
Moderator
•
7K Posts
0
June 19th, 2023 10:00
Hello dalle2,
Try these to kb’s to remove private lun.
https://dell.to/46ewT2c
https://dell.to/4692TF4
dalle2
4 Posts
0
July 10th, 2023 01:00
i dont found (colne feature properties ) version 05.33.009.5.184
DELL-Sam L
Moderator
Moderator
•
7K Posts
0
July 10th, 2023 07:00
Hello dalle2,
Here is a link to a kb that maybe of assistance. https://dell.to/3rh8065