Unsolved
This post is more than 5 years old
1 Message
0
1337
January 3rd, 2020 10:00
OME NFS setup file path error
I have tried a few different ways and can't seem to get the NFS share setup properly. I have OME and RM as fresh setups. I setup the RM to have a NFS share and the file path to the catalog on the server is C:\DellRepo\Catalog.xml. I was able to do the intergration with OME on the RM server to build the catalog so I know they can talk to each other.
I setup the firmware catalog with the share address being the RM server's IP address and the catalog path as /DellRepo/Catalog.xml. I have tried a bunch of different versions for the catalog path but all of them fail the test. I am able to access the share through my computer's windows explorer. What am I missing?
0 events found
Daniel My
12 Elder
•
6.2K Posts
0
January 3rd, 2020 15:00
I would start by restarting the appliance. The correct format for the file share address should be located in the OMEnt manual. There should also be a listing of ports that need to be open for various functions.
http://www.dell.com/openmanagemanuals/