wishtobeMrEMC

155 Posts

1867

February 16th, 2010 01:00

Zone

Dears,

I need to find out the zones that are not part of the active zoneset. It's a Brocade fabric. I prefer to get this list from the management console.

Guide me pls

cheers

Responses(8)

dynamox

2 Intern

•

20.4K Posts

0

February 16th, 2010 02:00

so how are you going to learn if you are too busy to open the manual ?

Mabro1

666 Posts

1

February 16th, 2010 01:00

Hi,

This document may help. It covers CLI commands for zones and zone administration for the webtool Management console.

It's the Brocade guide to understanding zoning. You may have it yourself already.

http://www.brocadekorea.com/download/resource/53_0000213_01.pdf

wishtobeMrEMC

155 Posts

0

February 16th, 2010 02:00

thanks dynamox . u were right .. let me read it

wishtobeMrEMC

155 Posts

0

February 16th, 2010 02:00

Mark, thanks . but I need a way to do it right away .. going thru the pdf wouldnt help me immediately ..

RRR

1 Rookie

•

5.7K Posts

0

February 18th, 2010 09:00

Or........... in the GUI go the the 3rd TAB (zoneset config) and look in the left column for any zones that are printed in bold. Those aren't in the active zoneset

wishtobeMrEMC

155 Posts

0

February 18th, 2010 20:00

Dear RR

thanks for the info. But, It works only on Fabric OS version v6.1.0c not on v5.10b.

cheers

RRR

1 Rookie

•

5.7K Posts

0

February 19th, 2010 01:00

Yes indeed.... that was one of the nice new features of FOS 6..... I'm sorry, but you didn't mention your FOS version. I'd consider the 3rd TAB anyway and compare the left and right column and see what zones are missing on the right.... ?

ConnectrixHelpe

259 Posts

0

February 19th, 2010 06:00

Hello,

Which model switch are you looking to zone on? I would highly recommend upgraded to newer code if your switch supports it. If the switches are supported by EMC you can contact your local EMC support representative to schedule the upgrade.

Thank you.

View All

No Events found!