This post is more than 5 years old
20 Posts
0
1576
migrate from DAS to switch environment
Dear all
we have to migrate a Hyper-V Cluster with 2 nodes from direct attached connectivity (to a VNX storage) to SAN (switched) environment that includes 2 new FC switches.
Which steps we have to follow for this migration?
Thanks and Regards
George
ddeepak
11 Posts
0
January 6th, 2017 01:00
Verify the compatibility of the hba fw and the FOS version in the switches. Configure the switch parameters, port, connect one switch at a time, create zones, activate, refresh paths at host end and verify, do it on the other side again and then you should be good to go.
ddeepak
11 Posts
0
January 3rd, 2017 19:00
Are you still looking for answers.? its all the basic stuff..
grant5
20 Posts
0
January 3rd, 2017 23:00
Hi
i would appreciate if you can give me a quick reply
BR
G
grant5
20 Posts
1
January 10th, 2017 01:00
THANKS A LOT