This post is more than 5 years old
13 Posts
0
5045
FOS upgrade
Hi
I will upgrade FOS from 5.3.0 to 6.3.0b
for a fabric have two ED-48k one on main site and the other on DR site
with ISL link between them
my environment is heterogeneous to the max
what should i check before starting the upgrade
i will check
HBA FW , Driver
PowerPath
what else should i check
and what the procedure for the whole process
what the risk
???????????????????
>>>>>>>>>>>>>
Many Thanks
Don't tell me the sky's the limit when there are footprints on the moon
Ayman_Talkhan
25 Posts
0
August 6th, 2010 03:00
Hello Mousa,
Along with the environment checks mentioned above you need to make sure that the correct sequence of upgrades is followed.
EMC began to support only one-level migration, which began with FOS v6.0.0, as it provides more reliable and robust migrations for customers. By having fewer major changes in internal databases, configurations, and subsystems, the system is able to perform the upgrade more efficiently, taking less time and ensuring a truly seamless and non-disruptive process for the fabric.
So upgrading to Fabric OS v6.3.0 is only allowed from Fabric OS v6.2.0 or later and so forth.
Hence the suggested upgrade path would be 5.x => 6.0 => 6.1 => 6.2 => 6.3 for best practice.
Kindly find attached the release notes for all 3 OS versions. The release notes contain very useful information about how to upgrade, fixed problems from previous versions, known problems and limitation, and an overall general synopsis of the new OS.
Note:
As firmware 6.0 is now archived, you will need to send an e-mail to EMC_GS_Web_Request@emc.com requesting the code along with the release notes.
I hope this answers all your questions, if you have any other questions/problems please let me know.
Have a great day.
3 Attachments
FOS_v6.1.0h_RN.pdf
FOS_v6.2.0c_RN.pdf
FOS_v6.3.0b_RN.pdf
Allen Ward
2.1K Posts
0
July 8th, 2010 12:00
You are definitely going to want to confirm against the firmware version on your arrays as well (Enginuity, FLARE, etc.)
Mousa_3lyan
13 Posts
0
July 9th, 2010 02:00
Hi
cant find a matrix link FOS version with HBA, FLARE,Enginuity ...
all i found in e-lab and heat
that this hba firmware supported with EMC or not
is that enough , and mean its tested to all FOS
anyway do you have Procdure or Doc how to upgrade ED-48K FOS
Thanks
Allen Ward
2.1K Posts
0
July 21st, 2010 14:00
I don't have a procedure doc for those specifically, but you should be able to find the documentation on Brocade's site.
ConnectrixHelpe
259 Posts
0
July 22nd, 2010 07:00
Hello,
EMC provides detailed Brocade upgrade instructions for all version of FOS. The upgrade instructions are available to our field and partners for EMC customers who have Premium Support where EMC or Partners do their upgrades as part of the support. The instructions are also available to EMC Enhanced Support customers who do their own FOS upgrades through Powerlink. Any issues finding these instructions please contact you local EMC Support Representatives.
Thank you.
ConnectrixHelpe
259 Posts
0
August 6th, 2010 09:00
One follow up note to Ayman's is that the email list he provided below is no longer valid. The email list for EMC personnel to request End of Service Life code that was archived. This email list is no longer used and a different process is used for providing archived code to our field and partners. If EMC does your upgrades please contact your local EMC support personel and they will know how to obtain it. If you go through another vendor for your upgrades you should contact them for the FOS.
Thank you.
Mousa_3lyan
13 Posts
0
August 6th, 2010 12:00
Thanks Ayman
I have send email for EMC_GS_Web_Request@emc.com and they send Release note with code
and in