Unsolved
This post is more than 5 years old
15 Posts
0
739
January 8th, 2008 05:00
DS-24M2 and Brocade 4/12 sw`s in C-Class ISL connection
I have 2 DS-24M2 i prod in a Open fabric. In default mode and interop mod not active. Domain ID`s 1-2
I have now 2 c-Class with Brocade 4/12 sw ( total of 4 ) Domain ID`s 100 to 104
These I will ISL connect to both my DS-24M2 in two fabric`s ( Domain ID 1, 100 and 103 and Domain ID 2, 101 and 104 )
C-Class B-sw will be prinsipals and DS will be default`s
Category: FC Switches
Itemcode: DS-24M2-REF
Firmware 06.02.00
B- firmware 5.03.0c
Type: 43.0
Role: principal
I know I have to upgrade to DS firmware 09.00.xx
At this time i can not change the R_A_TOV 10000 and E_D_TOV 2000 so that they have the same mill sec as my DS : 100-20
Anyone that have M and B switches to running in ISL mode?
Give me you pointers
BR
KLP
I have now 2 c-Class with Brocade 4/12 sw ( total of 4 ) Domain ID`s 100 to 104
These I will ISL connect to both my DS-24M2 in two fabric`s ( Domain ID 1, 100 and 103 and Domain ID 2, 101 and 104 )
C-Class B-sw will be prinsipals and DS will be default`s
Category: FC Switches
Itemcode: DS-24M2-REF
Firmware 06.02.00
B- firmware 5.03.0c
Type: 43.0
Role: principal
I know I have to upgrade to DS firmware 09.00.xx
At this time i can not change the R_A_TOV 10000 and E_D_TOV 2000 so that they have the same mill sec as my DS : 100-20
Anyone that have M and B switches to running in ISL mode?
Give me you pointers
BR
KLP
No Events found!
RRR
6 Operator
•
5.7K Posts
0
January 10th, 2008 06:00
lund-paulsen
15 Posts
0
February 1st, 2008 09:00
lund-paulsen
15 Posts
0
February 1st, 2008 09:00
Can a ESX boot host to CX3_20 be a member of several storage groups?
BR
KLP
Valdeb
3 Posts
0
March 4th, 2009 12:00
I need to work with the same configuration as you did.
What kind of configuration did you do? Do I need to change any parameters?
I'd been working with ISL between Connectrix B-Series and Connectrix M-Series but it's seems to be different.
Thanks in advance.