Unsolved
This post is more than 5 years old
13 Posts
0
3674
Does DS-200B equals to DS-220B and Brocade 200E??
Hi, I'm going to upgrade my DS-200B firmware but I find that not much information is about DS-200B (Not even in e-lab). Does anyone know whether it's actually equal to DS-220B or Brocade 200E? Or simply to say, can I upgrade my DS-200B from firmware v.5.3.0d to v5.3.2c? Does v.5.3.2c suitable for DS-200B?
Thanks.
Regards,
Jacky
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 20th, 2010 12:00
can you run "switchShow" command, what does it say for switch type (should be a number) ?
jacky_chan
13 Posts
0
November 20th, 2010 18:00
it's "switchType: 34.0"
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 20th, 2010 20:00
34 is DS-220B, go to this location to download EMC supported versions
Home > Support > Software Downloads and Licensing > Downloads C > Connectrix Firmware B Series
jacky_chan
13 Posts
0
November 21st, 2010 18:00
Thanks a lot! I have upgraded the switches successfully. But just feel strange why DS-200B is not shown in e-lab and caused confusion...
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 21st, 2010 19:00
34 also stands for Brocade 200E switch which is listed in E-Lab.
jacky_chan
13 Posts
0
November 21st, 2010 19:00
Yes, I can see Brocade 200E is shown in e-lab. But there comes confusion (at least for me) that the switch is "EMC brand" but no DS-200B under EMC tab. And there is no place mention that DS-200B equals to DS-220B...
jacky_chan
13 Posts
0
November 21st, 2010 19:00
It's fine now as I know the way to confirm the switch type ... appreciate for your hlep
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 21st, 2010 19:00
contact PowerLink support if you need official clarification.