Unsolved
This post is more than 5 years old
1 Message
0
2253
Cannot connect to discover and config Uninitiakized storage center
Dear all,
when i connect to SAN Scv 2020 via cable RJ45 from PC (IP: 192.168.0.100/24) to MGMT on SAN, and use software "Storage Management Client". but I cannot because error Service Tag...
I dont know happen.. Please advise me this proplem..
Thanks you so much.
Dev Mgr
4 Operator
4 Operator
•
9.3K Posts
0
November 13th, 2017 18:00
Plug both of the management ports into your LAN, and plug the computer into your LAN (same vlan/network/broadcast domain), and then run the discovery.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
November 14th, 2017 09:00
Hello dungnguyentienfpt,
Here is a link to the deployment guide for your SCv2020. http://topics-cdn.dell.com/pdf/storage-sc2000_deployment%20guide_en-us.pdf If you look on page 69 it explains how to setup and discover your SCv2020.
Please let us know if you have any other questions.