Unsolved
This post is more than 5 years old
10 Posts
0
9631
CX4-480 Default Login
I am a new resident onsite at a customer and the former SAN Admin is gone and they left NO passwords.
I've been told that the default passwords are still in place.
For the CX4-480 I've tried admin/password....admin/admin....Admin/admin....admin/Password and none of those works.
H E L P!!!
geoohl
10 Posts
0
June 26th, 2014 07:00
I'll give it a try and see if it works.
Thanks
geoohl
10 Posts
0
June 26th, 2014 07:00
Well tried all the information there....can't login using 192.168.1.1/setup
So how do I reset the username and password???
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
June 26th, 2014 07:00
i would reset the password
https://support.emc.com/search/?text=how%20to%20reset%20clariion%20password
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 26th, 2014 18:00
did you try this ?
How can we console into Clarion CX4-240
geoohl
10 Posts
0
June 27th, 2014 05:00
Is there no way to login to the management port using the IP?
I just don’t know the IP.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 27th, 2014 05:00
i am afraid you will need to find "remote hands" to assist you with this.
geoohl
10 Posts
0
June 27th, 2014 05:00
No --- unfortunately I am not anywhere near the data center.
geoohl
10 Posts
0
June 27th, 2014 06:00
Roger that……they just have prosphere in place here as well and I know if I change username and password on the system, I will have to also advise prosphere of the changes as well.
Thanks for all your help and support’
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 27th, 2014 06:00
is this box under active maintenance contract ?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 27th, 2014 06:00
that would be IP/setup ..you still need to have the credentials to login on that webpage.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 27th, 2014 06:00
if it is, open a ticket with support and ask them to dispatch a local CE to help you with that.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 27th, 2014 06:00
no worries, let us know when/how it gets resolved.
geoohl
10 Posts
0
June 27th, 2014 06:00
Well let’s just pray and hope that I don’t need to create any storage on the CX4-480.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 27th, 2014 06:00
you still need to connect to the management port ( i mean physically connect RJ45 to the port on the SP and to you laptop). You must be thinking of a Unisphere for VMAX where you use port 8443 to connect to the application, no such thing on Clariion.
geoohl
10 Posts
0
June 27th, 2014 06:00
Isn’t there an extension like :8443 or something that I can put at the end of the IP Address…..
I.E.