Some Clariion disks only visible by server_2

Question

I was provisioning some storage to Celerra using /nas/sbin/setup_clariion -all. All working well, but two out of 30ish disks only showing up as being accessible from server_2, but not server_3. This means I cannot create storage pool using disk with only one accessible server. It is NS-20 integrated system and seems to be working well. There is output of nas_disk -list. 65    y     137405  CK200083100342-0013 CLSTD d65           1,2 66    y     137405  CK200083100342-0021 CLSTD d66           1,2 67    y     137405  CK200083100342-0025 CLSTD d67           1 69    y     549623  CK200083100342-0014 CLSTD d69           1,2 70    y     549623  CK200083100342-0016 CLSTD d70           1,2 71    y     549623  CK200083100342-001E CLSTD d71           1,2 72    n     549623  CK200083100342-0026 CLSTD d72           1,2 73    n     549623  CK200083100342-001F CLSTD d73           1,2 75    n     549623  CK200083100342-0027 CLSTD d75           1 So I cannot use d73 with d75 in the same pool. Is there a way to fix that?

dynamox · Accepted Answer

i've seen where 'server_devconfig ALL -c -s -a' does not discover devices equally, so try running this command on individual bases server_devconfig server_3 -create -scsi -all

XRay1978 · Answer

Worked first time - thanks.

Celerra

Was this post helpful?