This post is more than 5 years old
2 Intern
•
214 Posts
0
446
Moving shelves from CX to NS?
Hi there,
I have a customer that wants to move shelves from a CX4-xxx to a NS480, putting the obvious support issues to one side is there any reason you can do this considering it's the same Clariion under the covers?
Thanks in advance,
Ed
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 8th, 2014 13:00
same CX4 backend, don't see any issues. Look at drive matrix OE to make sure that model is supported by the FLARE on NS.
edhoward
2 Intern
2 Intern
•
214 Posts
0
June 8th, 2014 13:00
Do you spend all day one ECN?
Thanks I thought that was the case.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 8th, 2014 13:00
heheh ..no i don't
Rainer_EMC
2 Intern
2 Intern
•
8.6K Posts
0
June 10th, 2014 08:00
Please check with your local EMC customer service team
Apart from firmware issues there might also be an impact to maintenance and the support database