1 Rookie
•
93 Posts
0
6825
Finding out iDrac IPs from CMC command line
Hello!
Is there some way i can list (from the M1000 CMC cmd line) which slot/blade has which iDrac IP?
I mean, i can "deploy" a blade/slot from the CMC cmd line, but i cant find a cmd that lists blade-IPs?!
There must be some, right?
wbr / Alex
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
1
November 9th, 2020 18:00
you can run below racadm command on CMC to get the iDRAC IP address of blades
racadm getniccfg -m server-X
X is slot number for which we need to get iDRAC IP address
E.g. racadm getniccfg -m server-1
Run below command to get more help on getniccfg command
racadm help getniccfg
DellEMCSupport
Moderator
Moderator
•
631 Posts
0
November 9th, 2020 18:00
Hi, please see below.
Connecting through the CMC
Step 1
Connect one end of a DB-9 null-modem or crossover cable to the RS-232 console serial port of the CMC.
Connect the other end of the cable to the RS-232 console serial port of the PC.
Step 2
On the PC terminal emulation program:
c. Set Flow Control to none.
d. Under Properties, select VT100 for Emulation mode.
e. Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the setting is for Terminal keys (not Windows keys).
Step 3
On the console monitor, the CMC application displays a login screen. Log in by using these defaults:
username root
password calvin
Viewing and Modifying CMC Network LAN Settings Using RACADM
Use the command getconfig -g cfgcurrentlannetworking to view IPv4 settings.
Use the command getconfig -g cfgCurrentIPv6LanNetworking to view IPv6 settings.
To view IPv4 and IPv6 addressing information for the chassis, use getsysinfo subcommand.
Enabling the CMC Network Interface
To enable/disable the CMC Network Interface for both IPv4 and IPv6, type:
racadm config -g cfgLanNetworking -o cfgNicEnable 1
racadm config -g cfgLanNetworking -o cfgNicEnable 0
Alexander-36725
1 Rookie
1 Rookie
•
93 Posts
0
November 10th, 2020 16:00
@DELL-Shine K yes thats it, thanks!