Unsolved
1 Rookie
•
5 Posts
0
32
x15 R2, 2 red 3 blue blinking code, problem
Hello there I have the exact same issue as the following member but on my x15 R2. My laptop can work for days and play games smoothly without any issiues as long as i dont turn it off or restart. Once shutdown or restart it would give 2red 3blue error code and it can take a while before u can start it up again. I have observed the temps during high end gaming and it never went beyond 90 so that's fine. I also noticed if I put my laptop in food freezer for around 10min it would start up normally and I can use it for days and days just as long as I don't shut it off.
JOcean
7 Technologist
7 Technologist
•
12.2K Posts
0
June 11th, 2024 11:53
That would indicate a memory problem. Have you tried reseating the RAM and I would also suggest running diagnostics, F12 at boot, just to confirm hardware integrity.
San84
1 Rookie
1 Rookie
•
5 Posts
0
June 11th, 2024 19:00
I don't think it's the memory even tough that's what the error code means, as I have done 1 full day continues memory test returning all working properly.
I believe this is something else, something more complex that needs someone with high knowledge of laptop working to figure out. And I hope someone here has that knowledg
JOcean
7 Technologist
7 Technologist
•
12.2K Posts
0
June 11th, 2024 23:11
@San84 Did you run Dell diagnostic or Memtest86 which is far more aggressive.
San84
1 Rookie
1 Rookie
•
5 Posts
0
June 12th, 2024 11:33
@JOcean yes I have, everything returned Good.
Als i run extensieve intelburn in test no issiues what so ever.
That's why I said I doubt this has anything to do with 2red 3 blue memory error or cpu/gpu in that case. If that was the case it would shown during one of those tests and the laptop wouldn't be able to runfor more then month now without issues, like I mention when u am able to turn the laptop on I can use it and do anything with it without any issiues what so ever. All games are running super smooth even the latest gen.
I have also updated the bios to lat st version in hope this would resolve but sadly no