Unsolved
1 Rookie
•
4 Posts
0
44
AW2523HF, I want to downgrade the firmware?
Alienware 25 Gaming Monitor AW2523HF
After upgrading the M3T104 (Alienware_AW2523HF_FWUpdate_M3T104_Windows.exe) driver on the monitor support page, there was a slight delay. So I would like to downgrade to the M3T101 version that was the version I had when I first received the monitor. But I cannot find it because it is not listed by version. I would appreciate it if you could send me the firmware by email or this page. I don't want any other solution.
Vanadiel
6 Professor
6 Professor
•
6.2K Posts
0
June 20th, 2024 13:54
The initial firmware is typically not available for download, and downgrade might not be possible even if it would be available.
Not sure where the slight delay is, but sometimes a factory reset of the monitor helps.
diveintoshine
1 Rookie
1 Rookie
•
4 Posts
0
June 21st, 2024 23:08
@Vanadiel I have one question. There was a time when I was using the aw2521hf, and the Alienware monitors at that time had the function to turn off FreeSync (Adaptive Sync) in the OSD, but the Alienware monitors released these days do not have it. Personally, I prefer to turn off Adaptive Sync in the OSD. It's not in the options, but is there a way to turn it off in the OSD or firmware? If not, are there any plans to create firmware that allows adaptive sync to be turned on or off from the OSD?
Vanadiel
6 Professor
6 Professor
•
6.2K Posts
0
June 22nd, 2024 02:17
Normally you turn it on/off from the drivers. Adrenalin software has the option to turn on/off Freesync.
I dun my DWF without Freesync.