Aurora R16, no AWCC on Win11, change/turn off the lights

Use Revo Uninstaller to remove any remnants of AWCC from your PC, including the registry entries. The go  HERE  and download the AWCC full installer. Alternatively, use wire snips to cut the LED power.

Also...after the reinstallation of AWCC, power the system down, unplug all components, discharge the flea power from the CPU (after unplugging, hold power button for 30 seconds). When AWCC has failed on my Aurora R13 with W11, what fixed it both times was to actually leave the system powered down for several days. I was lucky enough that I was able to do that as I could use my wife's computer in the meantime. Good luck!

Sadly enough there are no alternatives that I am aware off that can control the RGB on an Alienware machine. You can try SignalRGB but I doubt it will work.

Being stuck with AWCC is sadly a side effect of owning an Alienware...

I have an Alienware R16, with Win11. My AWCC works. Got to it from the Start Search. I changed the Ring color to R=0, G=0, B=0, and then turned the Brightness to 0.

@ProfessorW00d​ you didnt explain what wire to cut

Mine works.....NOW! I am so illiterate that it wasn't until I saw the letters AWCC and typed those into my search that I even knew I had a control panel. first thing that opened was the lights settings. changed instantly. I can sleep.

I was able to turn off all the lights except the Nvidia light in the Alienware Command Center. Anyone knows how to turn that off?