Unsolved
1 Message
0
954
Alpha R1, not starting, Fans Start and Stop in loop
Hi,
i bought a used R1 and it is not starting, When i press the Power Button the lights turn on and the fans starts up.
The only thing thing i can hear is the fans starting and stopping over and over again.
Nothing on shown on the monitor. i tried 2 different ones. I also tried starting by holding ctrl and esc, nothing.
Is there something i can do?
Alienware Area-51 ALX 2006
5 Practitioner
5 Practitioner
•
3.1K Posts
0
July 4th, 2020 11:00
hold the Alienware head button till the computer resets.
then unplug the computer after you shut it off and open it up to disconnect CMOS Battery and wait 5 min.
then replug the battery and close the computer up.
i would second of all get a new HDD or SSD?
bobriot
4 Posts
0
July 14th, 2020 11:00
First check you have the HDMI in the correct port, only one of them produces video the other is a passthrough.
Unplug it, open up the case and locate the reset pin, pull the blue jumper from it and hold the power button for 10 seconds. While you are there replace the yellow button cell battery for a fresh one.
Alienware Area-51 ALX 2006
5 Practitioner
5 Practitioner
•
3.1K Posts
0
July 17th, 2020 04:00
CMOS:
https://www.amazon.com/Battery-Alienware-Alpha-Machine-Desktop/dp/B07CLC97ZY/ref=sr_1_2?dchild=1&keywords=CMOS+alpha&qid=1594984344&sr=8-2
1Tb SSD:
https://www.amazon.com/CT1000BX500SSD1/dp/B07YD579WM/ref=sr_1_5?dchild=1&keywords=1tb+ssd&pd_rd_r=69199ed0-06c0-4bb4-b155-bd4cc5da5f98&pd_rd_w=DUtY3&pd_rd_wg=r9WRW&pf_rd_p=0ec05f25-9534-48fe-9c3e-40b89957230e&pf_rd_r=WJHMNZMMXBXSB04R6WVT&qid=1594984093&sr=8-5
Next thing is to pull the blue plastic off the Jumper pins and wait for 1 minute before reconnecting and restarting. Before all that just replace the CMOS and the HDD.