This post is more than 5 years old
1 Rookie
•
11 Posts
0
40009
June 7th, 2015 11:00
Cable for T320 8x3.5 to Perc H710
I have a T320 with the 8x3.5 hot-swappable backplane for SAS drives. I ordered a Perc H710 (p/n 342-4203) to replace the H310. The existing SAS cable has the wrong connectors for the H710.
I chatted with Dell this morning and they told me that I needed Dell Part# cy7n1. I ordered this. However, after ordering I searched online and the pictures seem to show a cable with only a single connector at each end.
What is the correct cable that I need?
Thanks.
0 events found
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
June 7th, 2015 15:00
Hello
CY7N1 is a cable to connect to a 4HDD backplane. The 8HDD backplane cable is DJXF7.
Thanks
kjohnston8
1 Rookie
•
11 Posts
1
December 2nd, 2015 17:00
That's right the existing cable should be good.
What OS are you running?
kjohnston8
1 Rookie
•
11 Posts
0
June 7th, 2015 18:00
Thanks Daniel, I will see if they can get my order modified.
Iteame
1 Rookie
•
9 Posts
0
December 2nd, 2015 16:00
I also plan to change the H310 to H710P. The Dell support page shows for my T320 server current config, that it contains a DJXF7 cable. Is it mean, that I need not change tha cable and the same cable good for H310 and H710? I have 8x 3.5 (hot swap) backplane.