Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

krauskopf.p

2 Posts

16761

July 31st, 2007 08:00

How to enable Demand Based Switching (CPU Power Saving) on PE 1950?

Hello, I tried to enable the Power Saving feature "Demand based Swithing" in the BIOS of a Poweredge 1950. But the entry seems to be locked. Is that supposed to be ReadOnly? PowerEdge 1950 BIOS-Version: 1.3.7 CPU: XEON 1530, 2GHz, Model 15 Stepping 6 Has anyone an idea? p.k.

Dennis_Smith

16 Posts

August 1st, 2007 15:00

Hi,
 
The only time this option is set to "disabled" and read only is when the processor does not support this option.
 

<ADMIN NOTE: Broken link has been removed from this post by Dell>

 
 

krauskopf.p

2 Posts

August 2nd, 2007 08:00

Yes, but thats a Xeon based on the new Core2 architecture. So I assumed that the CPU supports that mode. I know that Intel deactivates such stuff on lower price CPUs like the Celeron-CPUs but the Xeon is completely the other direction ;-). Can someone confirm that the Core2 Xeons have this mode disabled?

Message Edited by krauskopf.p on 08-02-2007 04:15 AM

Dennis Smith

946 Posts

September 27th, 2007 13:00

Hi krauskopf.p,
 
According to my documentation the only processors that have the ability for demand based switching on the 1950 are as follows:
 
Xeon E5310 1.6GHz 2x4MB 1066MHz 80 Watts No
 
Xeon E5320 1.86GHz 2x4MB 1066MHz 80 Watts Yes
 
Xeon E5335* 2.0GHz 2x4MB 1333MHz 80 Watts No
 
Xeon E5345 2.33GHz 2x4MB 1333MHz 80 Watts Yes
 
Xeon X5355 2.66GHz 2x4MB 1333MHz 120 Watts Yes
 
Xeon X5365* 3.00GHz 2x4MB 1333MHz 120 Watts Yes
 
Xeon L5310 1.60GHz 2x4MB 1066MHz 50 Watts No
 
Xeon L5320 1.86GHz 2x4MB 1066MHz 50 Watts No
 
 Xeon L5335 2.00GHz 2x4MB 1333MHz 50 Watts No

Was this post helpful?

View All

0 events found

No Events found!

Top