S4810 help setup radius authentication with windows server 2012 NPS

Question

I'm looking for some assistance setting up radius authentication using Windows Server 2012 NPS.  I have NPS already setup, I need some assistance with the switch configs.  Example: Shared Secret: test Radius Server: 192.168.1.8/24 Dell Force10 Mgmt IP: 192.168.1.10/24 I want to set two different groups,  Group A with priv level 15 and Group B with priv Level 2 .  How to configure this on the Dell Force10 S4810?

DELL-Josh Cr · Answer

Hi,

Here is the configuration guide for the switch for radius http://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_9.2(0.0)_Config-04-Oct-2013.pdf

Page 83

Here is a guide for configuring radius on the S series

http://www.force10networks.com/CSPortal20/TechTips/0059_ConfigurationExampleRADIUSonS.aspx

Networking General

Was this post helpful?