Unsolved
This post is more than 5 years old
2 Intern
•
192 Posts
0
17673
May 30th, 2013 11:00
passing multiple vlans to multiple unmanged switches question
I have a stack of dell 7024
I have Vlan 1 (LAN) and Vlan 200 (DMZ)
Can I configure one up-link to a dedicated DMZ switch (unmanaged) and another up-link to the dedicated LAN Switch (unmanged)?
Would this correctly route the traffic? these two unmanaged switches are then connected to a router. (separate interface for LAN and DMZ)
dirkdigs
2 Intern
•
192 Posts
0
May 30th, 2013 11:00
can i configure port 1 (default vlan) on the stack to go to m LAN switch
can i configure port 2 (DZ vlan 200) on the stack to go to my DMZ dedicated switch.
dirkdigs
2 Intern
•
192 Posts
0
May 30th, 2013 11:00
vlan 1 and vlan 200 are configured on ports 6,7,8 on both switches (stack)
switchport general mode
switchport access vlan 200
dirkdigs
2 Intern
•
192 Posts
0
May 30th, 2013 11:00
what do you mean policy based routing. can you explain a little more>
dirkdigs
2 Intern
•
192 Posts
0
May 30th, 2013 13:00
and then this is the uplink to my DMZ switch.
interface Gi1/0/10
spanning-tree portfast
mtu 9216
switchport access vlan 200
exit
dirkdigs
2 Intern
•
192 Posts
0
May 30th, 2013 13:00
as long as i have port 10 configured in access mode and associated with vlan 200 (DMZ) should it not know that it needs to send out all tagged 200 traffic out this port?
dirkdigs
2 Intern
•
192 Posts
0
May 30th, 2013 13:00
this seems have worked.
interface Gi1/0/7
spanning-tree portfast
mtu 9216
switchport mode general
switchport general allowed vlan add 200 tagged
exit