This post is more than 5 years old
17 Posts
0
407065
July 25th, 2012 05:00
Clear a port (or range of ports) of all settings (Cisco: default int)
I'm extremely new to Dell PowerConnect so bare with me. I work for a large education organisation and for the last 15 year we have only bought Cisco.
I'm loving the PowerConnect 8024f and 5524p, very happy with both of them, I'm just lost on how to quickly clear a port of all config and make it stock/blank again.
In Cisco IOS land I was very used to running (at config) default int gig 1/0/12, or even default int range gig 1/0/1-12, but I'm struggling to find the equal for the PowerConnects.
I'm running firmware 4.2.2.3 on the 8024f and 4.1.0.1 5524p.
Thanks in advance.
If I've missed a previous post that goes over this my apologies, I'm new to the forum as well.
No Events found!
iammacgyver
17 Posts
1
July 25th, 2012 16:00
'No switchport trunk native vlan' worked on the 5524 but no the 8024. When punched in 'switchport trunk native vlan 1' on the 8024 the line completely disappeared from that ports config.
Thanks for your help Daniel!
iammacgyver
17 Posts
0
July 25th, 2012 07:00
Thanks for the reply Daniel,
I've worked out how to clear most things from ports on both the 5524 and the 8024, but on both I'm still left with a trunk native vlan setting.
I understand It wont come into play unless I'm configuring the port to be a trunk, but its still bugging me that I cant clear it.
5524
interface gigabitethernet1/0/12
switchport trunk native vlan none
!
8024
SW-A-L1-7
#show running-config interface tengigabitethernet 1/0/21
duplex full
switchport trunk native vlan 999
Thanks again for your help :)
iammacgyver
17 Posts
0
July 25th, 2012 08:00
No effect on either switch sorry.