Unsolved
This post is more than 5 years old
11 Posts
0
39240
CAPS key doesn't work(Its not the keyboard)
I have a dell keyboard that shows the caps locking working when the computer is just starting to boot. Once it gets to the windows screen the caps led light stops working and i cant not switch the Caps on and off anymore. i tried a different keyboard on the computer and it has the same issue. i updated the latest BIOS, chip set, keyboard, usb drivers, did last know configuration. Also when i press the caps on the on screen keyboard the caps light comes on but i can only then switch it off using the on screen keyboard. So we know the keyboard caps button itself is not the problem. Any ideas?
RoHe
10 Elder
10 Elder
•
44.2K Posts
0
July 10th, 2012 11:00
Always include the PC model and version of Windows in your posts! :emotion-43:
If this is a USB keyboard, have you tried a different USB port on the rear of the tower?
pombano
11 Posts
0
July 11th, 2012 06:00
The machine is an Optiplex 380 and yes i tried the usb on the front and the back. Any other ideas
pombano
11 Posts
0
July 11th, 2012 09:00
The caps button works when i press it from the on screen keyboard but if i wanted to shut it off the keyboard wont allow me to do so. i know its not the keyboard becasue i tried other keyboards on the machine and its the same issue and i tried the original keyboard that didn't work and tried it in a different machine and it works fine. Its def not the keyboard.
osprey4
4 Operator
4 Operator
•
34.2K Posts
0
July 11th, 2012 09:00
Hi Pombano,
Try the "on-screen keyboard" to enable caps lock. Then see if your keyboard light turns on.
RoHe
10 Elder
10 Elder
•
44.2K Posts
0
July 11th, 2012 11:00
Since it works during the boot, before Windows loads, I suspect this is a software issue.
You still didn't say what version of Windows you have, but you might want to try running sfc /scannow from Start>Run.
If that doesn't help, try a Repair Reinstall.
Either way you need a CD/DVD with exactly the same version and Service Pack of Windows as is installed on the hard drive.
pombano
11 Posts
0
July 18th, 2012 08:00
didnt work any other ideas
RoHe
10 Elder
10 Elder
•
44.2K Posts
0
July 18th, 2012 10:00
What did you run? sfc, Repair/Reinstall, both?
pombano
11 Posts
0
July 18th, 2012 11:00
just did the sfc /scannow, it found no errors
pombano
11 Posts
0
July 18th, 2012 11:00
i went to command prompt and ran sfc /scannow as admin. it said scanning for verification then it said it did not find any errors.
pombano
11 Posts
0
July 18th, 2012 11:00
i actually didn't run it i don't have the windows cd
pombano
11 Posts
0
July 18th, 2012 11:00
windows 7
RoHe
10 Elder
10 Elder
•
44.2K Posts
0
July 18th, 2012 11:00
What version of Windows is this?
RoHe
10 Elder
10 Elder
•
44.2K Posts
0
July 18th, 2012 11:00
How did you run sfc without the Windows disk?
How do you know sfc found no errors? sfc doesn't give an (obvious) report on what it did or didn't do. If it's not happy, it will just abort without doing anything and without any warning messages.
If you're in the US, you can request the Windows CD here. Dell may charge you for it.
pombano
11 Posts
0
July 18th, 2012 11:00
can i do sfc /scannow without the windows cd
Mary G
4 Operator
4 Operator
•
20.1K Posts
0
July 18th, 2012 19:00
It might be worth looking at the Keyboard Settings in Control Panel and in Programs. Some keyboard software allows you to lock or disable the Caps Lock. I found that setting for a Logitech wireless KB using Setpoint..