Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Server BIOS DSS 1500/1510/2500 Version 2.8.0
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains new Intel Xeon Processor Scalable Family Processor Microcode to address CVE-2018-3639. CVE-2018-3640. This release contains BIOS firmware version 2.8.0 for Dell DSS 1500/1510/2500.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
- For memory sizes less than 1 TB, updated the MTRR algorithm to the same behavior as 2.4.3 and earlier BIOS versions.
- Network Stack IPv4 is enhanced by using RFC3021 to support the 31-bit subnet mask for point-to-point link.
New and enhanced features
- Enhancement to address security vulnerability CVE-2018-3639 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3639).
- Enhancement to address security vulnerability CVE-2018-3640 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3640).
- Updated the Intel Xeon Processor E5-2600 v4 Product Family Processor Microcode to version 0x0b00002E.
- Updated the Xeon Processor E5-2600 v3 Product Family Processor Microcode to version 0x3D.
- Added setup option QPI Link L1 Power Management. Default is set to Enabled.
- Added proper identification for maximum DIMM speed of 2666 MHz.
Read More- For memory sizes less than 1 TB, updated the MTRR algorithm to the same behavior as 2.4.3 and earlier BIOS versions.
- Network Stack IPv4 is enhanced by using RFC3021 to support the 31-bit subnet mask for point-to-point link.
New and enhanced features
- Enhancement to address security vulnerability CVE-2018-3639 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3639).
- Enhancement to address security vulnerability CVE-2018-3640 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3640).
- Updated the Intel Xeon Processor E5-2600 v4 Product Family Processor Microcode to version 0x0b00002E.
- Updated the Xeon Processor E5-2600 v3 Product Family Processor Microcode to version 0x3D.
- Added setup option QPI Link L1 Power Management. Default is set to Enabled.
- Added proper identification for maximum DIMM speed of 2666 MHz.
Version
2.8.0, 2.8.0
Release date
28 Jun 2018
Download Type
System BIOS
Category
BIOS
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: BIOS_28RJ2_WN64_2.8.0.EXE
File Size: 17.78 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
320b14fb4b8749e4cbf3cfe17b3bf265
SHA1:
fe709db4ff8b4f63b3ad603b17406278e756dc9f
SHA-256:
38af08a2f2aa1c3b2ce2115c62339236dd2794f25728be7dd26355dae532bde1
File Format: A GnuPG file which contains a cryptographic signature
File Name: BIOS_28RJ2_LN_2.8.0.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
6e3a917e42cab4fb3a161c8947f331e1
SHA1:
fdcc5befedf28df15d96c145d900810128330f08
SHA-256:
55a4523b392b3bbfcf6c9eaaf68462e0527d33a4339df81ccf449670dbffad0d
File Format: Update Package for MS Windows 32-Bit
File Name: BIOS_28RJ2_WN32_2.8.0.EXE
File Size: 12.9 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fcd67ce2cf08208a72b1983a3ab6eef8
SHA1:
610e00eb54843a861735aa530ac87db66d8c2f65
SHA-256:
418cf7e7afe337164431405b794dc8f012752f173496e1c9b96c9163cdbbe282
File Format: Update Package for Red Hat Linux
File Name: BIOS_28RJ2_LN_2.8.0.BIN
File Size: 14.39 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
e9f6b281a6c9518a7c4087a98270e1b4
SHA1:
6fdf55c5d87e637b6b9c89b7a7a1d8894b60ff79
SHA-256:
d7dc0eca9f876145d2805cbc21378b4e0fb9d13d52742dd96a056e61b53146bd
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
Applies to
DSS1510 DSS1500 DSS2500 BIOS
SWB,BIOS,13G,DSS,Q1FY19
Installation instructions
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.