Search Results (87.4K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello, I have a problem with my laptop - dell inspiron 5767 i7-7500u and its cooling system. I've took my laptop for cleaning and checked it myself - it's clean and from just looking I haven't noticed any problems with connections, yet the fan doesn't spin. The weirdest thing of all is that when I u
Question
•
Inspiron
Community Accepted Solution
Hello Dell storage experts:I am going to update disk firmware in PowerVault ME5024 storage. Guidelines tells to stop I/O before the firmware update. but I still could not find the way of doing so. please guide to me stop I/O of system.
Question
•
PowerVault
Community Accepted Solution
I have an Inspiron 3847 Desktop computer and was wanting to upgrade it. The upgrades I am wanting to do are install a better cpu, more and better ram, a better psu with higher wattage, a better graphics card, and a high storage ssd. I was wondering what the limitations are for upgrades on this mothe
Question
•
Inspiron
Community Accepted Solution
The flipside of my title question is: If I have changed my system (Precision 3541) from 'RAID On' mode to 'AHCI mode', should I install the Intel RST driver after re-installing Windows 10 to my HDD? I had to reinstall Windows after my original SSD failed. I am currently running without a PCIe
Question
•
Precision Mobile Workstations
Official Solution
Why is the ram locked to default speeds? Someone needs to push this thread up as high as it can go, this deters customers away. I know DELL wants us to buy their ram and it’s such a short sighted move, PUSH for a bios update for us to place whatever ram we want into our build, LIKE EVERYONE ELSE. Th
Question
•
Alienware Desktops
Community Accepted Solution
Hello from Germany! My Optiplex: - i5, 16 GB RAM and 256 GB SSD, W10 pro 22H2, latest BIOS and all drivers are up to date today I added a Nvidia NVS 310 low profil card to the 5050 and install the latest driver from the nvidia site. Device manager reports the internal Intel graphic card and the NV
Question
•
Optiplex Desktops
Community Accepted Solution
Newbie here....my PC has been running a bit sluggish lately and I'm wondering if I could upgrade the RAM on this from 16 GB to 32 GB? how easy would that be, any tutorials on here? Never done it before but want to give it a try.Laptop has run well for ~3 years now. Basic tasks, outlook, chrome, PPT,
Question
•
Latitude
Community Accepted Solution
Hi,I am trying to LAG two of the 10 gig ports between an N2024 running OS6 and a S3124 running OS9. I can't seem talk between the two stacks. Maybe I'm getting tripped up by a naming convention change. I have include the port configs for the ports in question. If someone could help me out I'd really
Question
•
Networking General
Official Solution
I just downloaded the 5.4.0 OS bundle. The file format has changed from OVA to VMDK. My Vcenter Esxi 8.0 will not load the VMDK as a valid template. The file stated in the video is different that the bundle I downloaded. Is there a new method?
Question
•
Networking Education
Community Accepted Solution
HiyaCan someone please advise on what I can purchase to upgrade to a better storage device?I've read the bottle neck on these devices is the HDD, but not sure if NVMe (is that right?) Or m2.sata or whatever I keep reading 😅 for a SSD to increase performance.Thanks!<Private data removed from publ
Question
•
Inspiron
Community Accepted Solution
Hi!Trying to Build a Good Gaming PCCurrent Set upXPS8960Intel I7-13700, 32gb ram, rtx4070Mainboard : 0XD433PSU : didn't check the actual unit, but i assume 750wLooking for buy RTX4090, 1000w + PSU, and probably more ram. Can I just put plug-in-play GPU, and PSU? not modifying
Question
•
XPS Desktops
Community Accepted Solution
Hello , I have to disable SSH on all of my Dell IDRACs because of Security Reasons . I also want to configure SNMP with our Community String . I created an Template to rollout to al IDRACS so that SNMP become enable and also shows our Community String . That works fine and i can choo
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, I have questions about the behavior when setting up replication using RCG in PowerFlex. 1. when I add a volume pair to RCG, do the original and replica volumes have the same name? 2. How are the volumeClasses of the original and replicated volumes set? 3. if the source and replicated volum
Question
•
PowerFlex
Community Accepted Solution
I purchased an Optiplex 5055 which came with a Ryzen Pro A8-9600 and 4gb of ram. I booted it up and it had bios revision 1.11.0 and was fine.Then I put a Ryzen 7 1700 (NOT PRO) into it as well as another 8gb ddr4 2400mhz ram into it to which the computer would no longer boot. The power led would fla
Question
•
Optiplex Desktops
Community Accepted Solution
Why were Dell 15 5558 laptop computers NOT tested for upgrade from Windows 10 to Windows 11?
Question
•
Inspiron
Community Accepted Solution
Hello, I own a Dell Optiplex 790 series with 8 GB RAM and an i5-2400 CPU 3.10GHz (2nd Generation). CPU: I came here to ask if this motherboard would be able to handle an Intel Core i5-4690K 3.5GHz Quad-Core (4th Generation) Processor. I also know that an i7-2600 processor is supported for this model
Question
•
Optiplex Desktops
Community Accepted Solution
Hello, I'm looking for a part number. I need to add the optional HDMI 2.1 port for the Optiplex 7010 Micro. Thank you very much for your help.
Question
•
Optiplex Desktops
Community Accepted Solution
Hi, I have a server with a failed main board, I bought a replacement (ebay) which doesn't have an iDRAC enterprise licence. How can I transfer the licence from the failed board to the new (used) board? Thanks in advance.
Question
•
Systems Management General
Community Accepted Solution
Hello, I recently bought a DELL PowerEdge T140 server, which didn't come with RAM. Consequently, I had to buy RAM separately. The RAM I chose is the KTD-PE426D8/16G, which is a DDR4 2666MT/s ECC Registered DIMM, and should be compatible with my server as per the manual. Despite this, the server won'
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello together, I am asking for a friend...After we have discovered a new server with OME 4.1.0, a new user (OME_29fbxxxxx) with the Administrator user role appears on the iDRAC board under the local users. So far we have no idea how this is generated and why. We have only been using this latest OME
Question
•
Dell OpenManage Enterprise